3D-printed car part designs: clips, covers and trim.

Ford · reference 1 071 662 · model/year unconfirmed

Ford 1071662 mounting clip

Community replacement mounting clip identified by its author as Ford 1 071 662.

Published files

Free original STL downloaded and archived

Printing notes

The author does not specify material, infill or printing orientation. Nylon manufacturing options are under evaluation.

What the author documents

The source identifies the reference number. The digital model measures approximately 17.75 × 10.5 × 16 mm; these are mesh dimensions, not measurements of an original Ford part.

CC0 with a No AI notice on the source. Images are deterministic renders from the STL, not AI-generated images or photographs. See the original design for its licence terms.

Fiat Tipo estate · 2016

Parcel shelf retaining pin

Plastic pin connecting the parcel shelf to the boot lid, based on the author’s published replacement.

Published files

Original STL downloaded; free source model

Printing notes

Author: PETG. Infill and layer height are not specified. The author found TPU insufficiently strong.

What the author documents

The author reports using PETG for the replacement pins on a 2016 Tipo estate.

Creative Commons Attribution, as declared by the source. Rendered from the original mesh without geometry changes. See the original design for its licence terms.

Mitsubishi Colt · 1995

Seat folding knob

Replacement plastic hand grip for the seat folding control. The seat locking mechanism is not included.

Published files

Original STL v1 downloaded; free source model

Printing notes

Author: PETG, 0.2 mm layers, 15% infill; base on the bed with supports.

What the author documents

The author publishes the replacement knob and recommends PETG for exposure to sunlight.

Creative Commons Attribution–ShareAlike, as declared by the source. These renders are shared on the same licence terms; the original mesh is unchanged. See the original design for its licence terms.

Mitsubishi · model and year not specified

Rear blind holder

Plastic holder for a rear blind. The exact vehicle and blind assembly still need to be identified.

Published files

Original STL downloaded; free source model

Printing notes

Author: PETG, 0.16 mm layers and six walls. Infill is not specified.

What the author documents

The author provides a printable mesh and a PETG printing profile.

Creative Commons Public Domain, as declared by the source. Rendered from the original mesh without geometry changes. See the original design for its licence terms.

Dodge Challenger R/T · 2009

Centre console lid backplate

Replacement plastic backing for the console lid, retaining the original mechanism and screws.

Published files

Original files downloaded and archived. Displayed variant: 2544219_FINAL_1-piece_update_01102023_-_Console_back_plate.stl

Printing notes

Author: ABS, 20% infill.

What the author documents

The author describes repairing the lid and adjusting the latch position by 0.75 mm to improve closure.

Creative Commons — Attribution — Noncommercial. Deterministic renders of the original mesh; not photographs or physical fit tests. See the original design for its licence terms.

Renault Clio III

Front seat adjustment knob

Plastic hand grip for the seat adjustment rod; excludes the seat locking mechanism.

Published files

Original files downloaded and archived. Displayed variant: 7291654_seat_knob_v1.stl

Printing notes

Material and infill not specified by the author.

What the author documents

The author reports a snug rod fit and continued use of the knob.

Creative Commons — Attribution — Noncommercial — Share Alike. Deterministic renders of the original mesh; not photographs or physical fit tests. Renders shared under the same Attribution–ShareAlike terms. See the original design for its licence terms.

Peugeot 306 Cabriolet

Roof mechanism cover

Plastic trim cover for the convertible roof mechanism.

Published files

Original files downloaded and archived. Displayed variant: 1561475_Protege_toit_306cab_v3.stl

Printing notes

Author: ASA, 260°C nozzle, 100°C bed, supports; infill unspecified.

What the author documents

The author documents a second fit iteration and publishes a revised model.

Creative Commons — Attribution — Noncommercial — Share Alike. Deterministic renders of the original mesh; not photographs or physical fit tests. Renders shared under the same Attribution–ShareAlike terms. See the original design for its licence terms.

Citroën Berlingo First

Door lock cover

Plastic cover surrounding the door lock.

Published files

Original files downloaded and archived. Displayed variant: 2721956_101123_B02_-_Bouchon_de_Berlingo_v1.stl

Printing notes

Author used PC-CF and suggests ABS or PETG; 0.2 mm layers.

What the author documents

Editable geometry and printing guidance are published.

Creative Commons — Attribution — Noncommercial. Deterministic renders of the original mesh; not photographs or physical fit tests. See the original design for its licence terms.

Infiniti G37S saloon · 6-speed manual

Centre console lid latch

Replacement plastic latch for the centre console lid.

Published files

Original files downloaded and archived. Displayed variant: 5071105_G37S_Center_Console_Latch.stl

Printing notes

Author: PLA test, PAHT-CF final; 100% infill, printed on its side with supports and brim.

What the author documents

The author describes the material iterations and links an assembly video.

Creative Commons — Attribution. Deterministic renders of the original mesh; not photographs or physical fit tests. See the original design for its licence terms.

Volkswagen-style number plate frame

Number plate frame retaining clip

Small plastic retainer for a compatible number plate frame.

Published files

Original files downloaded and archived. Displayed variant: 7471279_License_plate_clip_original.stl

Printing notes

Author: PETG, ABS or ASA; 0.2 mm layers, four walls, 100% infill, no supports.

What the author documents

The author reports testing on an OEM-style Volkswagen frame.

Creative Commons — Attribution. Deterministic renders of the original mesh; not photographs or physical fit tests. See the original design for its licence terms.

Honda Civic VIII

Sun visor clip and cover kit

Plastic clip and cover components for retaining the sun visor.

Published files

Three STL files; paid download

Printing notes

Author: PETG, ABS or ASA; 0.16–0.2 mm layers, three to four walls, 100% infill.

What the author documents

The author reports caliper measurements and a fit test on a vehicle.

Tesla · vehicle variant unspecified

Roof sunshade clip

Plastic clip that retains a compatible accessory roof sunshade.

Published files

STL; paid download

Printing notes

Author: ASA, 0.2 mm layers, four walls, 100% infill, no supports.

What the author documents

The author reports testing on a Tesla.

Peugeot 3008 II · reported fit on a 2019 vehicle

Boot floor side panel

Replacement plastic side panel for the boot floor.

Published files

STL and SolidWorks part

Printing notes

Author: ASA or ABS, 0.16 mm layers, 100% infill.

What the author documents

The author reports fit on a 2019 vehicle and describes a reversible left/right design.

Toyota Prius V / Alpha / + · 2012–2015 pre-facelift

Headlight washer cover and bracket

Plastic outer cover and mounting bracket; excludes the washer actuator.

Published files

Two STL files

Printing notes

Author: PETG, ABS or ASA; 20–30% infill, three to four walls, supports.

What the author documents

The author describes reverse engineering from a 3D scan and installing the part.

Škoda · exact model/year to confirm

Parcel shelf peg and locking plug

Two-part plastic fixing for a parcel shelf attachment in the boot lid.

Published files

Free original files downloaded and archived: F3D, STL

Printing notes

Author: PETG, 100% infill, 0.4 mm nozzle, no supports.

What the author documents

The author describes inserting the peg into the boot lid and securing it with the separate plug.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Astra J

Tailgate lock cover repair pin

Plastic repair piece for the tailgate lock cover; excludes the locking mechanism.

Published files

Free original files downloaded and archived: STL

Printing notes

Author profile: PLA, 0.1 mm layers. Infill unspecified; PETG is a proposed quotation alternative, not an author-tested substitution.

What the author documents

The author describes flattening the damaged cover and using a 2 mm × 20 mm metal dowel with cyanoacrylate adhesive.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Corsa E · author-labelled 24.5 mm cover

Wheel nut cover removal tool

Hand tool for removing plastic wheel nut covers; not a wheel fixing or torque tool.

Published files

Free original files downloaded and archived: 3MF, STL

Printing notes

Author: any material; infill unspecified. PETG at 20% is a provisional quotation profile.

What the author documents

The author resized a CC0 cover-removal design to 24.5 mm and supplies versions with and without lettering.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Opel · model/year unspecified

6.5-inch front door speaker adapter with cover

Plastic adapter for a 6.5-inch front door speaker.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: PETG, 0.3 mm layers, 80% infill, three walls and four top/bottom layers.

What the author documents

The author publishes the adapter and a PETG profile, explicitly advising against PLA.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Insignia B

Tailgate cable grommet retaining clip

Plastic retaining clip for the tailgate-to-body cable grommet.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: ASA, 0.2 mm layers; infill unspecified. 20% is a provisional quotation assumption.

What the author documents

The author reports extending the catches by 0.6 mm for a closer fit. That change is already present in the source file.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Corsa C

B-pillar stopper plug cover

Small plastic cover for a stopper opening on the B-pillar.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: PETG, 0.2 mm layers, no supports; infill unspecified. 20% is provisional for quotations.

What the author documents

The author designed a replacement after the original cover was lost.

Creative Commons — Attribution — Share Alike, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Corsa B

Sun visor retaining hook

Plastic hook for retaining the sun visor.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: 0.4 mm layers, no supports; material and infill unspecified. PETG at 20% is proposed only for costing.

What the author documents

The author reports that the hook worked without adjustment.

Creative Commons — Attribution — Share Alike, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Zafira C Tourer

Sun visor retaining hook

Screw-mounted plastic sun visor retainer.

Published files

Free original files downloaded and archived: STL

Printing notes

Author suggestions: PETG, nylon, PCTG or CPE; infill unspecified. PETG at 20% is a provisional costing profile.

What the author documents

The author recommends a heat-tolerant filament and publishes the replacement hook.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Corsa C

Lighter and USB socket faceplate

Plastic faceplate for a lighter socket and USB module; electrical parts and wiring are excluded.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: PETG or ABS for heat resistance; infill unspecified. PETG at 20% is a provisional costing profile.

What the author documents

The author supplies separate left and right layout variants adapted from the original faceplate.

Creative Commons — Attribution — Share Alike, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Astra · generation/year unspecified

Sun visor clip

Plastic visor retainer designed to reuse the original screw.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: 0.15 mm layers, three walls, infill above 15%, no supports. Material unspecified; PETG at 20% is a costing proposal.

What the author documents

The author states that the original screw can be reused and publishes a support-free printing orientation.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Captur; generation not specified

Wing trim fixing clips

Replacement clips for exterior wing trim.

Published files

Free original files downloaded and archived: STL

Printing notes

ASA, 30% infill proposed for costing only; author profile unavailable.

What the author documents

Title identifies Captur wing clips; no print profile or fit measurements published.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Zoe; generation not specified

Window rubber trim clip

Retains the rubber window trim.

Published files

Free original files downloaded and archived: STL

Printing notes

PETG upright per author; 30% infill is a provisional costing assumption.

What the author documents

Author uses PETG upright and adhesive on cleaned rubber; removal may break the clip.

Creative Commons — Attribution — Share Alike, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. These renders are shared under the same Attribution–ShareAlike terms as the source. See the original design for its licence terms.

Twingo; generation not specified

Rear parcel shelf clip

Fixing for the rear parcel shelf.

Published files

Free original files downloaded and archived: STL

Printing notes

ABS, 0.2 mm, 40% infill, flat with supports; supplier infill may differ.

What the author documents

Author specifies ABS, 0.2 mm, 40% infill, flat orientation and supports.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Clio GT 2008; left side

Left boot cover rail end

End piece for the retractable boot cover rail.

Published files

Free original files downloaded and archived: SKP, STL

Printing notes

Material not specified; PETG and 30% infill proposed for costing only.

What the author documents

Author identifies the left side and mentions mirroring for the opposite side.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Master / Movano; years not specified

Boot trim strip clip

Replacement clip for a boot trim strip.

Published files

Free original files downloaded and archived: STL

Printing notes

Author: Greentec Pro, 0.2 mm, no supports. PETG 30% is an unvalidated supplier alternative.

What the author documents

Author describes a simplified, larger clip printed in ExtrudR Greentec Pro, 0.2 mm without supports.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Modus; year not specified

Parcel shelf retaining clip

Retains the parcel shelf on either side according to the author.

Published files

Free original files downloaded and archived: FCSTD, STL

Printing notes

Author: PLA, 20%, supports and raft. PETG at 20% is a provisional heat-resistant alternative for costing.

What the author documents

Author reports PLA, 20% infill, supports and raft; describes 40 × 34 × 10 mm geometry.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Scenic III

Sunshade retaining clip

Replacement retaining clip for the sunshade.

Published files

Free original files downloaded and archived: 3MF, STL

Printing notes

ABS selected from author options; 30% infill provisional because author does not specify it.

What the author documents

Author recommends PAHT-CF or ABS and explicitly rejects PETG and PLA.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

Astra H 2004

Armrest retaining clip

Replacement clip for the armrest.

Published files

Free original files downloaded and archived: STL

Printing notes

PETG, 30% infill proposed for costing only.

What the author documents

Identification from title and file; description and print profile absent.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

207; year not specified

Door seal clip

Replacement fixing for the door seal.

Published files

Free original files downloaded and archived: STL

Printing notes

PETG, 100% infill, 0.15 mm, no supports per author.

What the author documents

Author allows PLA or PETG, 100% infill, 0.15 mm and no supports.

Creative Commons — Attribution, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.

308 SW 2016

Boot trim clip

Replacement clip for the boot area.

Published files

Free original files downloaded and archived: STL

Printing notes

PETG, 100% infill, no supports per author.

What the author documents

Author specifies PETG, 100% infill and no supports.

Creative Commons — Public Domain, as declared by the source. Images are deterministic renders of the downloaded mesh, not photographs of manufactured parts. See the original design for its licence terms.